CODAR Ocean Sensors logo
CODAR Ocean Sensors - The Leaders in HF Radar Technology      

SeaSonde

General Specifications
 
>> Download Product Overview
& General Specs.

PDF approx. 370k  

  SeaSonde Site Installation
Schematic

PDF approx. 400k  

 
   SeaSonde Remote Unit
Specifications & Configuration
Options
(SSRS-100)

  Auto-APM Kit
(SSDA-APM)

  SeaSonde Central Site
Management/
Data Combining Station
SSDP-100

  Combine Suite
License Upgrade
- Extended Version
(SSDP-CS-UPEX)

  NEW Advanced Feature -
Multi-Static Functionality

  SeaSonde Multi-Static Data
Processing Software Package
(SSDA-ES100)

  SeaSonde Bistatic
Transmitter Package
SSBT-100

  Vessel Detection Software
(SSDA-SHIP)

  Pushing the Range
of Your SeaSonde

  Protecting the SeaSonde
from Lightning and
Other Electrical Surges


SeaSonde Network Accessories

  Transponder & Transponder
Extender Kit
(SSTR-101 & SSTR-EX)

  Field Service Kit
(FSK-100)

  Antennae Base
Hinge Assembly
(SSRA-BSHG-A)

  Dome Antennae
Guy Rope Holder
(SSRA-GR-A)

  Connector & Adapter Kit
(CAK-200)

  External Hard Disk,
FireWire Type
(EHD-500)

  Extended Lightning
Protection Kit
(LT-E1)

  UPS Power Conditioning Unit
(UPS-1500)

  Equipment Rack
(RACK-1)

  UPS Power Conditioning Unit
with Battery Array
(UPS1500-6B)

  SeaSonde SatDrive Kit
(SSDA-SATD)

  Hard Shipping/Carry Case Set
(CCS-5)

  SeaSonde Enclosure
(ENC36)

User Links
Related SeaSonde Publications
 
RiverSonde
 
  >> Download this document  (PDF approx. 572k)



CODAR OCEAN SENSORS
Uninterruptable Power Supply (UPS) Power Conditioning Unit
with Battery Array

CODAR Product Code: UPS1500-6B-120V or UPS1500-6B-220V

Product Description:
An Uninterruptible Power Supply (UPS) connecting the SeaSonde unit to power source (e.g. wall plug) will provide a layer of protection to electronics from power surges that come from power line and also provide for continued quality performance through power fluctuations (sometimes referred to as “brownouts”). UPS is rated at least 1500VA (1050 watts).

To provide power to SeaSonde when normal power is not available (sometimes referred to as a “blackout”) the UPS, connected to a 6-battery array will provide power for continued operation. The UPS & Battery Array will supply 500 watts for approximately 8 hours.

A sturdy 19” equipment rack (CODAR Product Code RACK1) is included with the UPS with 6-battery array. This equipment rack will hold UPS and all 6 batteries, with space available for mounting SeaSonde remote unit electronics.

The UPS with Battery Array is intended to only provide power conditioning and emergency power to the SeaSonde. Neither air-conditioning unit nor any other electronics operating at site should be connected to the UPS with Battery Array.

Note: SeaSonde will auto-shutoff if internal chassis temperatures exceed safe levels, to avoid heat damage, and will continue to attempt restarting itself until safe operating temperatures have returned.

UPS with Battery Array and equipment rack are intended for indoor use only.

UPS1500-6B
CODAR Product Code: UPS1500-6B
UPS Features: 1050 Watts / 1500 VA, Interface Port DB-9 RS-232, Extended runtime model, Rack Height 2 U
Select from one of:
CODAR Product Code UPS1500-6B-120V, Input 120V / Output 120V,
CODAR Product Code UPS1500-6B-220V, INput 220V, Output 220V

Includes: CD with software, Documentation CD, Installation guide, Smart UPS signaling RS-232 cable,
USB cable, User Manual

Battery Features (Per Battery)
Cascading capabilities: Horizontal console port servers can be cascaded to manage up to 1,024 devices.
Rack Mount: 1U rackmountable. Hardware included.
Intelligent Battery Management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
Hot Pluggable Operation: Add or remove servers without having to power off the switch.
Internal Hot Swap Batteries

Equipment Rack Features
Fits standard 19” wide electronics.
Power Strip Included.
Height (when assembled): approx. 2 meters
Weight: approx. 45 KG (100 lbs.)
UPS1500-6B Total Product Weight (UPS, batteries & equipment rack): approx. 227 KG (500 lbs.)

UPS1500-6B-120V Technical Specifications
UPS Technical Specifications
UPS Output
Output Power Capacity: 1050 Watts / 1500 VA
Max Configurable Power: 1050 Watts / 1500 VA
Nominal Output Voltage: 120V
Output Voltage Distortion: Less than 3% at full load
Output Frequency (sync to mains): 50/60 Hz +/-
3Hz user adjustable +/- 0.1
Crest Factor: up to 5 : 1
Waveform Type: Sine wave
Output Connections: (6) NEMA 5-15
Bypass: Built-in bypass

UPS Input
Nominal Input Voltage: 120V
Input Frequency: 50/60 Hz +/- 5 Hz (auto sensing)
Input Connections: NEMA 5-15P
Cord Length: 1.83 meters
Input voltage range for main operations: 92 - 147V
Input voltage adjustable range for main operations: 90 - 150V
Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time: 3 hour(s)
Typical Backup Time at Half Load: 22.2 minutes (525 Watts)
Typical Backup Time at Full Load: 8.6 minutes (1050 Watts)

Communications & Management
Interface Port(s): DB-9 RS-232, Smart-Slot, USB
Available SmartSlot™ Interface Quantity: 1
Control panel: LED status display with load and battery
bar-graphs and On Line : On Battery : Replace Battery : and Overload Indicators, LED status display with On Line : On Battery : Replace Battery and Overload indicators
Audible Alarm: Alarm when on battery : distinctive
low battery alarm : configurable delays
Emergency Power Off (EPO): Yes

Surge Protection & Filtering
Surge energy rating: 540 Joules
Filtering: Full time multi-pole noise filtering : 0.3%
IEEE surge let-through : zero clamping response
time : meets UL 1449
Physical Dimensions
Maximum Height: 432.00 mm
Maximum Width: 85.00 mm
Maximum Depth: 559.00 mm
Rack Height: 2U
Net Weight: 27.5 KG

Environmental
Operating Environment: 0 - 40 °C
Operating Relative Humidity: 0 - 95%
Operating Elevation: 0-3000 meters
Storage Temperature: -20 - 50 °C
Storage Relative Humidity: 0 - 95%
Storage Elevation: 0-15000 meters
Audible noise at 1 meter from surface of unit: 45.00 dBA
Online Thermal Dissipation: 393.00 BTU/hr
Battery Technical Specifications
Battery Unit Output
Battoutvolt: 48
Internal Batteries & Runtime
Battery Volt-Amp-Hour Capacity: 864
Battery Type: Maintenance-free sealed Lead-Acid
battery with suspended electrolyte : leakproof
Battery mounting: Enclosed battery cabinet
Expected Battery Life (years): 3 - 5
Included Battery Modules: 2
RBC™ Quantity: 2
Battery blocks per string: 4

Physical (Per battery)
Net Weight: 32.91 KG
Maximum Height: 45200 mm
Maximum Width: 86.00 mm
Maximum Depth: 559.00 mm
Rack Height: 2U

Environmental
Operating Environment: 0 - 40 °C
Operating Relative Humidity: 0 - 95%
Operating Elevation: 0-3000 meters
Storage Temperature: -20 0 50 °C
Storage Relative Humidity: 0 - 95%
Storage Elevation: 0-15000 meters

Equipment Rack Technical Specifications
Net Weight: approx. 45 KG
Maximum Height: 2055.00 mm
Maximum Width: 523.00 mm
Maximum Depth: 749.00 mm
Weight Capacity (static load): 454 KG
Minimum Mounting Depth: 740.00 mm
Maximum Mounting Depth: 740.00 mm
Rack Height: 43U


† Actual product provided may vary from technical specifications and images shown here.

†Specifications and appearance are given as guidelines and may change without notice.

SeaSonde Information & Specifications - version 1 created 12/2008
 
                                                                                                                                                                                                                                                          
 
 

© CODAR Ocean Sensors 2000 - 2017
 
About CODAR | Intro to HF Radar | News | Products | Support | Contact Us | Help | Partners Sales Support