|
| |
| |
>> Download this
document (PDF approx. 240k)
|
CODAR
OCEAN SENSORS
SeaSonde® Transponder
CODAR Product Code: SSTR-101
Product
Description:
|
| Small,
portable transponder used for SeaSonde antenna pattern
measurements. The
SeaSonde Transponder is built into a water-resistant (not
waterproof) case containing
transponder electronics and can be used on
boat or land. The SSTR-101 comes with
parts suitable for operation at frequencies
between 24-50 MHz. |
 |
SSTR-101 Includes:
Transponder, two radial whips, one monopole transmit whip, one custom USB cable,
one 12V battery and a 110V/220V charger.
Technical Specifications:
Approximate Dimensions: 11.5” x
4”x 9” (transponder box only)
Approximate Weight: 8lbs.
Recommended Accessory:
Transponder Extender Kit (CODAR product
code SSTR-EX) enabling operation inside
the
lower SeaSonde frequency bands (from 4- 24 MHz).
†
Specifications and appearance are given as guidelines and may change without
notice.
SeaSonde Transponder Extender Kit
CODAR Product Code: SSTR-EX
Product Description:
Transponder Extender Kit includes antenna and associated hardware enabling a
SeaSonde transponder (CODAR product code SSTR-101) to measure antenna patterns
inside the lower SeaSonde & Long-Range SeaSonde frequency bands (from 4-
24 MHz).
SSTR-EX Includes:
• (1) Four-piece 12MHz transmit whip
(for
boat patterns) |
| • (1) Transmit signal cable |
| • (1) 20’ grounding cable |
| • Lug nuts |
Recommended Accessory:
Transponder Extender Kit (CODAR product code SSTR-EX) is designed
to work with SeaSonde Transponder (CODAR product code SSTR-101).
† Specifications and appearance are given as guidelines and may change
without
notice.
|
|
| |
|
|
